Honda CB 600F Hornet 2007 Shop Manual page 414

REAR WHEEL/SUSPENSION
Remove the pivot collar and dust seals from the
swingarm left pivot.
Check the dust seals and collar for damage or
fatigue.
Check the needle bearing for damage.
Remove the pivot collars and dust seals from the
swingarm right pivot.
Check the dust seals and collars for damage or
fatigue.
Turn the inner race of right pivot bearings with your
finger.
The bearings shoulrt turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the swingarm pivot.
Remove and discard the bearings if the races do not
turn smoothly and quietly, or if they fit loosely in the
swingarm pivot.
PIVOT BEARING REPLACEMENT
Remove the snap ring from the swingarm right
pivot.
14-20
DUST SEALS
PIV
DUST SEALS
BEARING