FRAME/BODY PANELS/EXHAUST SYSTEM
Remove the exhaust pipe mounting bolts/nuts,
washers and collars.
Remove the exhaust pipe.
Carefully release
0,
the
sensor wire
from the frame.
DISASSEMBLY/ ASSEMBLY
Remove the socket bolts, washers and rear protec
tor.
Remove the socket bolts, collars, rubbers and front
protector.
Install the front protector with the rubbers and col
lars.
Tighten the socket bolts to the specified torque.
TORQUE: 12 N•m (1.2 kgf•m, 9 lbf.ft)
2-14
BOL TS/WASHERS/COLLA .!l, S/NUTS
SOCKET BOLT/WASHERS
SOCKET BOLTS/COLLARS/RUBBERS
SOCKET BOLTS/COLLARS/RUBBERS