FUEL SYSTEM (PGM-FI)
Install the setting plate while aligning the cut-out
with the lug on the IACV motor.
Install the screws and tighten them to the specified
torque.
TORQUE: 2.1 N·m (0.2 kgf·m, 1.5 lbf . ft)
Install the throttle body (page 5-70).
MAP SENSOR
OUTPUT VOLT AGE INSPECTION
Connect the test harness to the ECM connectors
(page 5-14).
Measure the voltage at the test harness terminals
(page 5-36).
CONNECTION: 89 (+)-A18 (-)
STANDARD: 2. 7
The MAP sensor output voltage (above) is mea
sured under the standard atmosphere (1 atm =
1,013 hPa).
The MAP sensor output voltage is affected by the
distance above sea level, because the output volt
age is changed by atmosphere.
Check the sea level measurement and be sure that
the measured voltage falls within the specified
value.
5-92
-
3.1 V
M
3.5
3.1
3.0
2.7
2.5
2.0
1.5
1.0
0.5
O
500
1,000
1,500
11,650)
13,300)
(4,950)
2.5
2.1
2,000 :m
16,6001 (!cot)
Altitude