Camshaft Installation - Honda V65 MAGNA Shop Manual

~HONDA
~ V65MAGNA
CAMSHAFT INSTALLATION
NOTE:
• Follow this procedure from beginning to
end, even if you are only servicing one
cylinder head.
• Check the camshaft marks so that you
install each camshaft in its correct location.
• The marks on the camshaft mean:
EX RR (ER): Rear cylinder exhaust
IN RR (I R): Rear cyl inder intake
EX FR (EF): Front cylinder exhaust
IN FR (IF): Front cylinder intake
• The camshaft sprockets are interchange-
able.
Rear Cylinder Head
Lubricate the cylinder head cam bearing surfaces
with molybdenum disulfide grease.
Turn the crankshaft clockwise until the T1-3 mark
on the flywheel rotor aligns with the rear crankcase
mating surfaces.
CAUTION:
When turning the crankshaft, make sure the
cam chains don't jam at the cam chain ten-
sioners or at the crankshaft.
CYLINDER HEAD/VALVE
MARKS
Date of Issue: Dec, 1982
©
HONDA MOTOR CO., LTD.
149
10-19