Install the each camshaft holder onto the camshafts.
Be sure to align the
dowel pins ,n the
camshaft holder
align properly with
rhe
holes in the
cylinder head
properly.
Apply engine oil to the threads and seating surfaces
of the camshaft holder bolts.
Install the twenty holder bolts with new eight seal
ing washers as shown.
Finger tighten the bolts.
Gradually tighten the camshaft holder bolts until the
camshaft holders lightly contact the cylinder head
surface.
I
NOTICE
Failure to tighten the camshaft holder in a criss
cross pattern might cause a camshaft holder to
break.
Tighten all camshaft holder bolts in the numerical
order cast on the camshaft holders.
TORQUE: 12 N•m (1.2 kgf•m. 9 lbf•ft)
Install the cam chain guide B. and tighten the bolts.
I
CYLINDER HEAD/VALVES
CAMSHAFT HOLDER
g
SEALING WASHERS
HilliOi��
8-29