Abs Problem Code Index - Honda CB 600F Hornet 2007 Shop Manual

ANTI-LOCK BRAKE SYSTEM (ABS; CB600FA)

ABS PROBLEM CODE INDEX

NOTE:
• The ABS indicator might blink in the following cases. Correct the faulty part.
- Incorrect tire pressure.
- Tires not recommended for the motorcycle were installed (incorrect tire size).
- Deformation of the wheel or tire.
• The ABS indicator might blink while riding under the following conditions. This is temporary failure. Erase the problem
code and perform the pre-start self-diagnosis. The ABS is normal if the indicator goes off. Ask the rider for the riding
conditions in detail when the motorcycle is brought in for inspection.
- The motorcycle has continuously run bumpy roads.
- The front wheel leaves the ground for a long time when riding (wheelie).
- Only either the front or rear wheel rotates.
- The ABS operates continuously.
- The ABS control unit has been disrupted by an extremely powerful radio wave (electromagnetic interference).
Problem
Code
-
ABS indicator circuit malfunction
•
Indicator related wires
.
Front wheel speed sensor circuit malfunction
11
Wheel speed sensor or related wires
Front wheel speed sensor malfunction
•
Wheel speed sensor or related wires
12
•
Electrical noise/intermittent interruption
Rear wheel speed sensor circuit malfunction
•
13
Wheel speed sensor or related wires
.
Rear wheel speed sensor
14 • Wheel speed sensor or related wires
Electrical noise/intermittent interruption
Fru11l speed sensor pulse
•
21
.
Pulser ring or wheel speed sensor
Rear speed sensor pulse
23
Pulser ring or wheel speed sensor
Solenoid valve malfunction
31
32
--
33
34
37
38
.
Front wheel lock
41
•
Riding condition
42
.
Wheel speed sensor or related wires
43 Rear wheel lock
Riding condition
• Wheel speed sensor or related wires
51 Motor lock
52 Motor stuck OFF
53 Motor stuck ON
Fail-safe relay circuit malfunction
54
61 Power supply voltage low
�
Power supply voltage high
62
71 Incorrect tire size
CPU (ABS control unit)
81
(A) Pre-start self-diagnosis (page 16-7)
(B) Ordinary self-diagnosis: diagnoses while the motorcycle is running (after pre-start self-diagnosis)
16-10
Function failure
Detection
Symptom/Fail-safe function
A B
• ABS indicator never come ON
at all
-
• ABS indicator stays ON at all
•
.
Stops ABS operation
0 0
Stops ABS operation
0
•
Stops ABS operation
0 0
•
Stops ABS operation
0
.
Stops ABS operation
0
•
Stops ABS operation
0
• Stops ABS operation
0 0
.
I
Stops ABS operation
.
0
Stops ABS operation
.
0
I
.
0 0 Stops ABS operation
0
0
Stops ABS operation
•
0 0
Stops ABS operation
•
0 0
Stops ABS operation
.
•
0
0 Stops ABS operation
0 0
Stops ABS operation
.
•
0
Stops ABS operation
0
0 Stops ABS operation
Refer
to
-
16-21
16-21
16-11
16-11
16-13
16-13
16-11
16-13
16-15
16-11
16-13
16-15
-
16-17
16-19
16-20
16-20