Honda CB 600F Hornet 2007 Shop Manual page 384

RONT WHEEL/SUSPENSION/STEERING
Install the front fork bolt to the fork slider.
INSTALLATION
Install the fork leg through the steering stem and
top bridge.
Align the top end of the fork slider with the upper
surface of the top bridge.
Tighten the bottom bridge pinch bolt to the speci­
fied torque.
TORQUE: 39 N-m (4.0 kgf•m. 29 lbf•ft)
Tighten the fork bolt to the specified torque if it was
removed.
TORQUE: 34 N·m (3.5 kgf•m. 25 lbf•ft)
Tighten the top bridge pinch bolt to the specified
torque.
TORQUE: 22 N·m (2.2 kgf·m. 16 lbf·ft)
Install the following:
- front fender (page 2-7)
- front brake calipers
- CB600FA
- CB600F (page 15-41)
- front wheel (page 13-19)
13-30
(page 15-36)
,
FORK SLIDER
j