Honda CB 600F Hornet 2007 Shop Manual page 107

LUBRICATION SYSTEM
Install the dowel pins into the oil pump cover.
Install the oil pump cover to the oil pump body.
Install and tighten the oil pump assembly bolts to
the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Check the oil pump operation by turning the pump
shaft.
If necessary, reassemble the oil pump.
INSTALLATION
Apply engine oil to new O-rings and install them
onto the oil pipe B.
Apply a locking agent to the oil pipe B mounting
bolt threads.
Install the oil pipe Band tighten the bolts securely.
Install the dowel pins to the crankcase.
4-12
OIL PUMP C OVER
DOWEL PINS
ASSEMBLY BOLTS