Honda CB 600F Hornet 2007 Shop Manual page 482

6. Failure Reproduction with a New Speed Sensor
Replace the rear wheel speed sensor with new
one (page 16-24).
Connect the ABS modulator 25P connector.
Erase the problem code (page 16-9).
Perform the pre-start self-diagnosis and check
the ABS indicator (page 16-7).
Dose the indicator blink?
YES - Faulty ABS modulator.
NO - Faulty removed wheel speed sensor.
PROBLEM CODE 31, 32, 33, 34, 37 or 38
(Solenoid Valve)
1. Failure Reproduction
Erase the problem code (page 16-9).
Perform the pre-start self-diagnosis (page 16-7).
Retrieve the problem code (page 16-8).
Does the indicator indicate the code "31, 32, 33
or 34"7
YES - Faulty ABS modulator.
NO - Normal (problem code is not stored;
temporary failure).
PROBLEM CODE 51, 52 or 53 (Pump
Motor)
1. Fuse Inspection
Remove the seat (page 2-4).
Check the "ABS MOTOR" fuse (30A) in the ABS
fuse box for blown.
Is the fuse blown?
YES - GO TO STEP 2.
NO
- GO TO STEP 3.
ANTI-LOCK BRAKE SYSTEM (ABS; CB600FA)
ABS INDICATOR
¼
if
y
-� G)
ABS INDICATOR
16-15