Honda CB 600F Hornet 2007 Shop Manual page 63

Install the rear protector with the socket bolts and
washers.
Tighten the socket bolts to the specified torque.
TORQUE: 12 N•m (1.2 kgf•m. 9 !bf.ft)
INSTALLATION
EXHAUST PIPE
MOUNTING NUTS
22 N·m (2.2 kgf•m.
16 lbf•ft)
MUFFLER
MOUNTING NUT
22 N•m (2.2 kgf•m,
16 lbf·ft)
MUFFLER
EXHAUST PIPE
REAR PROTECTOR
EXHAUST PIPE
Check that the exhaust pipe stud bolt protrusion
from the exhaust port is specified length as shown.
SPECIFIED LENGTH: 45.0
FRAME/BODY PANELS/EXHAUST SYSTEM
SOCKET BOLTS
1? N·m (1.2 kgf-m. 9 lbf·ft)
BAND BOLT
22 N·m (2.2 kgf•m, 16 lbf-ft)
- 46.0 mm (1.77 - 1.81 in)
SOCKET BOLT/WASHERS
@
�
EXHAUST PIPE STUD BOLT
45.0 - 46.0 mm
(1.77-1.81 in)
JOINT NUTS
12 N-m (1.2 kgf-m.
9 lbf,ft)
EXHAUST PIPE
2-15