Apply molybdenum oil solution to the starter idle
gear shaft sliding surface.
Install the starter idle gear and shaft.
Install the right crankcase cover (page 9-25).
STARTER CLUTCH
REMOVAL
Remove the clutch (page 9-6).
Remove the starter reduction gear from the crank
case.
Temporarily install the following:
- starter idle gear
- starter idle gear shaft
Insert the gear holder between the starter idle gear
and driven gear as shown.
TOOL:
Gear holder, M2.5
Remove the starter clutch mounting bolt and
washer.
Remove the temporarily installed parts.
Remove the starter clutch outer assembly.
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
07724-0010100
STARTER CLUTCH OUTER ASSEMBLY
�
9-17
I
I