Install the headlight bulb aligning its tab with the
groove in the headlight unit.
If you touch the bulb with your bare hands, clean it
with cloth moistened with denatured alcohol to pre
vent early bulb failure.
I
NOTICE
Avoid touching the halogen headlight bulb. Finger
prints can create hot spots that cause a bulb to
break.
Hook the bulb retainer properly.
Connect the headlight bulb 2P connector.
Install the dust cover, aligning its tabs with groove
of headlight unit.
Install the headlight unit (page 20-6).
POSITION LIGHT
BULB REPLACEMENT
Remove the headlight unit (page 20-6).
Remove the bulb socket/position light bulb from the
headlight unit.
Remove the position light bulb from the bulb
socket.
Installation is in the reverse order of removal.
I
LIGHTS/METER/SWITCHES
20-7