Honda CB 600F Hornet 2007 Shop Manual page 408

REAR WHEEL/SUSPENSION
Install the rear brake caliper bracket onlo the guide
of the swingarm.
Coat the axle surface with thin layer of grease.
Be ci,reful not to
damage the brake
Place the rear wheel in the swingarm so the brake
pads and speed
disc is positioned between the brake pads.
sansor (C8600FAJ
Install the drive chain over the driven sprocket .
Install the axle from the left side through the setting
plate, swingarm, wheel and caliper bracket.
Install the washer and axle nut.
Adjust the drive chain slack (page 3-19).
Tighten the axle nut to the specified torque.
TORQUE: 98 N•m (10.0 kgf•m, 72 lbf . ft)
SHOCK ABSORBER
REMOVAL
Support the motorcycle using a safety stand or a
hoist, raise the rear wheel off the ground.
Remove the following:
- side covers (page 2-4)
- rear wheel (page 14-7)
Remove the bolt and rear brake fluid reservoir.
14-14
CALIPER BRACKET