=RONT WHEEUSUSPENSION/STEERING
Hold the axle and tighten the axle bolt to the speci
fied torque.
TORQUE: 59 N·m (6.0 kgf·m. 44 lbf . ft)
Tighten the right axle pinch bolt to the specified
torque.
TORQUE: 22 N·m (2.2 kgf•m, 16 lbf.ft)
Install the left brake caliper and tighten new mount
ing bolts to the specified torque.
TORQUE: 30 N·m (3.1 kgf-m, 22 lbf.ft)
With the front brake applied, pump the fork up and
down several times to seat the axle and check brake
operation by applying the brake lever.
Make sure that the front axle end is flush with the
outer surface of the left fork leg .
Tighten the left axle pinch bolt to the specified
torque.
TORQUE: 22 N•m (2.2 kgf•m, 16 lbf.ft)
Check the front wheel speed sensor air gap (page
CB600FA only.·
16-24).
13-20
--