INSPECTION
Check the fuel level sensor and arm for damage.
Measure the resistance at the fuel level sensor 2P
(Natural) connector terminal with moving the float
at the top "F" and bottom "E" position.
Resistance
IGNITION SWITCH
INSPECTION
Remove the headlight unit (page 20-6).
Release the ignition switch 2P (Blown) connector
from the meter stay.
Disconnect the ignition switch 2P (Brown) connec
tor.
Check for continuity between the wire terminals of
the ignition switch connector in each switch posi
tion.
Continuity should exist between the color coded
wires as follows:
IGNITION SWITCH:
OFF
LOCK
TOP''F"
BOTTOM "E"
a -12 n
234-2400
KE.Y
KEY OFF
KEYOFF
LOCKPIN
CO«"'lN
LIGHTS/METER/SWITCHES
FUEL RESERVE
• ---- SENSOR
ARM
20-19