Honda CB 600F Hornet 2007 Shop Manual page 373

Do not get grease Install the brake discs with the arrow mark facing in
on the brake discs the normal rotating direction.
or stopping power Install and tighten new mounting bolts to the speci­
will be reduced. fied torque.
TORQUE: 20 N•m (2.0 kgf•m, 15 lbf.ft)
Apply grease to the dust seal lips and install the
dust seals until they are flush with the wheel hub.
Install the speed sensor pulser ring onto the right
CB600FA only:
wheel hub.
Install the new torx bolts and tighten them to the
specified torque.
TORQUE: 7.0 N•m (0.7 kgf•m, 5.2 lbf•ft)
INSTALLATION
Install the side collars.
The right s,de collar
,s
longer than the
left side collar.
Coat the axle surface with thin layer of grease.
Place the wheel between the fork legs so that the
Be careful not to
right brake disc is positioned between the brake
damage the brake
pads.
pads and wheel
Insert the axle from the left side until its end is flush
speed sensor
with the outer surface of the left fork leg.
/CB600FA).
FRONT WHEEL/SUSPENSION/STEERING
�� �'---.
illiiiliiiiii.
CB60
-=
-I
..,
AKE DI
ii •
•
. @JI'°'--;()
...
'
.....
• •
__ MARKj
PULS
..
-
A
::--►
-
TORX BOLTS
13-19