HYDRAULIC BRAKE
Pull the boot out of the master cylinder and remove
the snap ring using the special tool.
TOOL:
Snap ring pliers
Remove the push rod. master piston, primary cup
and spring.
INSPECTION
Clean inside of the master cylinder and the master
piston with clean brake fluid.
Check the piston cups and boot for wear, deteriora
tion or damage.
Check the spring for damage.
Check the master cylinder and piston for scoring,
scratches or damage.
CB600FA-
Measure the master cylinder I.D.
SERVICE LIMIT: 17.515 mm (0.6896 in)
Measure the master piston O.D.
SERVICE LIMIT: 17.405 mm (0.6852 in)
15-28
07914-SA50001
CB600FA:
CB600F:
CB600FA:
SNAP RING
PRIMARY CUP
SPRING
MASTER PISTON
PISTON CUPS
MASTER PISTON
PISTON CUP
PUSH ROD