Honda CB 600F Hornet 2007 Shop Manual page 383

Pull the fork damper rod up and install the fork
spring with the tapered end facing up into the fork
slider.
Attach the fork damper holder to the fork damper.
TOOL:
Fork damper holder 070MF-MBZC120
Install the fork spring collar.
Set the spring collar holder to the spring collar
holes.
TOOL:
Spring collar holder 070MF-MBZC110
Compress the spring collar with the spring collar
holder while pulling up the fork damper holder.
Install the stopper plate between the nut and the
spring collar.
TOOL:
Stopper plate 070MF-MBZC130
Remove the fork damper holder.
Apply fork fluid to a new O-ring and install it to the
fork bolt.
Install the front fork bolt to the fork damper.
Tighten the lock nut to the specified torque with
holding the fork bolt.
TORQUE: 20 N-m (2.0 kgf-m, 15 lbf-ft)
Remove the stopper plate and the spring collar
holder.
FRONT WHEEL/SUSPENSION/STEERING
--1
FORKDAMPER
HOLDER
SPRING COLLAR
TAPERED END
l
FORK SPRING
NUT
13-29