Honda CB 600F Hornet 2007 Shop Manual page 81

MAINTENANCE
Replace the sealing washer with a new one.
Install and tighten the drain bolt to the specified
torque.
TORQUE: 30 N-m (3.1 kgf-m, 22 lbf-ft)
Check that the oil filter boss protrusion from the
crankcase is specified length as shown.
SPECIAED LENGTH: 16. 0 - 17.0 mm (0.63 - 0.67 in)
Apply clean engine oil to new oil filter cartridge P""""�E""rr.
threads and O-ring.
Install the new oil filter and tighten It to the specified
torque.
TOOL:
Oil filter wrench
TORQUE: 26 N·m (2.7 kgf•m, 19 lbf-ft)
3-16
07HAA-PJ70101
16. 0 -17.0mm
(0. 6 3 - 0. 6 7 in)