BATTERY /CHARGING SYSTEM
BATTERY
REMOVAL/INSTALLATION
Remove the seat (page 2-4).
Always rum the
19nit1on switch OFF
Unhook the battery holder band and remove the
before removing
rubber cover.
the battery
Remove the negative terminal screw, then discon- �� ... --�
nect the negative cable from the battery negative
terminal.
Remove the positive terminal cover.
Remove the positive terminal screw, then discon
nect the positive cable from the battery positive ter
minal.
Remove the battery.
Installation is in the reverse order of removal.
Connect the
positwe terminal
After installing the battery, coat the terminals with
first and then the
clean grease.
negative cable
VOLTAGE INSPECTION
Measure
multimeter.
VOLTAGE (20
Fully charged:
Under charged: Below 12.3 V
TOOL:
Digital multimeter
17-6
the battery
voltage
using
°
C/68
F):
°
13.0 - 13.2 V
Commercially available
a
digital