REAR WHEEUSUSPENSION
Remove the nuts and driven sprocket.
Remove the driven flange collar.
Drive out the driven flange bearing using the special
tool.
TOOLS:
Driver
Att achment, 42 X 47 mm 07746-0010300
Pilot. 22 mm
Install the bearing remover head into the bearing.
From the opposite side install the bearing remover
shaft and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing remover head, 20 mm 07746-0050600
Bearing remover shaft
14-10
07749-0010000
07746-0041000
07GGO-0010100 or
07746-0050100
DRIVEN SPROCKET
\
-
I
DR
ATTACHMENT/PILOT