Honda CB 600F Hornet 2007 Shop Manual page 330

,...
Install rhe bear,ng
mto che crenkcBss
with the marked
side fac,ng out.
INSTALLATION
Apply molybdenum oil solution to the shift fork
grooves in the M3/4, C5 and C6 gear.
Install the mainshaft into the crankcase.
Install the mainshaft bearing into the crankcase.
Apply a locking agent to the set plate bolt threads.
Install the mainshaft bearing set plate with its "OUT
SIDE" mark facing out.
Tighten the set plate bolts to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m. 9 lbf•ft)
CRANKCASE/TRANSMISSION
11-13