Honda CB 600F Hornet 2007 Shop Manual page 453

HYDRAULIC BRAKE
Remove the mounting bolts and brake caliper.
DISASSEMBLY
Remove the caliper bracket from the caliper body.
Remove the pad spring and bracket pin boot from
the caliper body.
Remove the caliper pin boot from the caliper
bracket.
If the caliper pin boot and bracket pin boot are hard,
damaged or deteriorated, replace them with new
ones.
Place a shop towel over the pistons.
Position the caliper body with the pistons facing
Do not use high
down and apply small squirts of air pressure to the
pressure air or bring
the nozzle roo close fluid inlet to remove the pistons.
1he inter
Be careful nor 10 Push the dust seals and piston seals in and lift them
out.
damage 1he piston
sliding surface
Clean the seal grooves, caliper cylinders and pis­
tons with clean brake fluid.
15-34
CALIPER BODY
PAD SPRING
PISTON SEALS
DUST SEALS
BRACKET