INSPECTION
Check the piston cups and boot for wear, deteriora
tion or damage.
Check the spring for fatigue or damage.
Check the master cylinder and piston for scoring,
scratches or damage.
Measure the master cylinder I.D.
SERVICE LIMIT: 12.755 mm (0.5022 in)
Measure the master piston O.D.
SERVICE LIMIT: 12.645 mm (0.4978 in)
ASSEMBLY
�BOOT
SNAP RING
BRAKE LEVER
Coat the master piston and piston cups with clean
brake fluid.
Install the spring onto the piston end.
Install the master piston with the spring into the
Do not allow the
master cylinder.
piston cup lips to
turn msrde out.
I
MASTER PISTON
SPRING
NUT
5.9 N-m (0.6 kgf•m,
4.4 lbf.ft)
HYDRAULIC BRAKE
� PIVOTBOLT
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
MASTER CYLINDER
'
·
-
BRAKE LIGHT S WITCH
SCREW
1.2 N•m (0.1 kgf•m, 0.9 lbf . ft)
MASTER CYLINDER
-J
15-23