Honda CB 600F Hornet 2007 Shop Manual page 307

CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
Install the dowel pins.
Install the wave washer and thrust washer onto the
starter idle gear.
Install the right crankcase cover while turning the
lifter lever clockwise to engage the lifter lever spin­
dle groove with the lifter piece flange.
Install the right crankcase cover bolts with the
clamp.
Tighten the right crankcase cover bolts crisscross
pattern in two to three steps.
Secure the EOP switch wire with the clamp.
9-26