Steering Stem - Honda CB 600F Hornet 2007 Shop Manual

STEERING STEM

REMOVAL
Remove the following:
- headlight unit (page 20-6)
- combination meter (page 20-10)
- front wheel (page 13-14)
Release the immobilizer receiver 4P (Natural) and
ignition switch 2P (Blown) connectors from the
meter stay, then disconnect the connectors.
Release the engine stop switch wire clip from the
meter stay.
Release the immobilizer receiver, ignition switch
wires clamp (right side) and main harness wire
clamp (left side) from the meter stay.
CB600FA only:
Release the front brake hose from the guide of .---­
meter stay.
Release the clutch cable from the guide of meter
stay.
Remove the bolts and meter stay from the top
bridge.
Release the main harness wire clip from the head­
light stay.
Remove the headlight stay, releasing the stay boss
from the steering stem grommets.
FRONT WHEEL/SUSPENSION/STEERING
-...-
NNECTOR
13-31