Honda CB 600F Hornet 2007 Shop Manual page 192

FUEL SYSTEM (PGM-FI)
• Do not damage the throttle body. It may cause
incorrect throttle and idle valve synchronization.
• The throttle body is factory pre-set. Do not disas­
semble in a way other than shown in this man­
ual.
• Do not loosen or tighten the white painted bolts,
nut and screws of the throttle body. Loosening or
tightening them can cause throttle valve and idle
control failure.
Viewed from cylinder head side and throttle sensor side:
Viewed from air cleaner housing side and throttle drum side:
5-82
PAINTED WHITE
PAINTED WHITE
5.1 N•m
(0.5 kgf-m, 3.8 lbf•ft)
PAINTED WHITE
PAINTED WHITE
PAINTED WHITE