Honda CB 600F Hornet 2007 Shop Manual page 279

CYLINDER HEAD/VALVES
In case the cam sprockets were removed, tighten
the cam sprocket bolts to the specified torque.
TORQUE: 20 N·m (2.0 kgf-m, 15 lbf·ft)
Turn the crankshaft clockwise one full turn (360
and tighten the other cam sprocket bolts.
Remove the stopper tool from the cam chain
tensioner lifter.
Install a new sealing washer and tighten the sealing
bolt.
Recheck the valve timing.
CYLINDER HEAD COVER ASSEMBL V
Install the PAIR check valve port plates into the cyl­
inder head cover.
8-30
° )
STOPPER TOOL
�f
CAM CHAIN TENSIONER LIFTER
BOLT
1\ ,
I
' -
'-.
$�
SEALING WASHE