REMOVAL/INSTALLATION
Remove the air cleaner housing (page 5-61 ).
Disconnect the MAP sensor 3P (Black) connector.
Disconnect the vacuum hose from the MAP sensor.
Remove the screw and MAP sensor.
Installation is in the reverse order of removal.
IAT SENSOR
REMOVAL/INSTALLATION
Remove the left side cover (page 2-4).
Disconnect the IAT sensor 2P (Gray) connector.
Remove the screws and IAT sensor from the air
cleaner housing.
Always replace 1he
Installation is in the reverse order of removal.
O-ring
a new
with
one.
FUEL SYSTEM (PGM-FI)
5-93