LIGHTS/METER/SWITCHES
REMOVAL/INSTALLATION
Remove the air cleaner housing (page 5-61 ).
Disconnect the VS sensor 3P (Black) connector.
Remove the bolt and VS sensor.
Check the O-ring is in good condition, replace if nec
essary.
Installation is in the reverse order of removal.
TACHOMETER
SYSTEM INSPECTION
When the ignition switch is turned ON, check that
the tachometer needle moves to full scale and then
returns to zero.
If the needle does not show initial function, check
for combination meter power input line (page 20·
12).
Remove the meter cover (page 2-5).
Remove the dust cover.
Check for loose or poor contact terminals at the
combination meter 20P connector.
20-14
TACHOMETER NEEDLE