Honda CB 600F Hornet 2007 Shop Manual page 198

FUEL SYSTEM (PGM-FI)
Apply small amount of engine oil to new seal rings
and 0-rings.
Install the seal ring and 0-ring to each injector.
Install the injectors to the fuel rail.
Apply oil to new 0-rings and install them to the
IACV joints.
Install the IACV joints to the throttle body.
Install the joint plate and tighten the screw to the
specified torque.
TORQUE: 2.1 N•m (0.2 kgf•m, 1.5 lbf·ft)
5-88
INJECTOR
FUEL RAIL
INJECTORS
IACV JOINTS
JOINT PLATE
.�-:71!1
fiil
... _.
SEAL RING