Honda CB 600F Hornet 2007 Shop Manual page 479

ANTI-LOCK BRAKE SYSTEM (ABS; CB600FA)
3. Speed Sensor Line Short Circuit Inspection (at
control unit side)
Lift and support the fuel tank (page 3-5).
Disconnect the ABS modulator 25P connector
and the speed sensor 2P (Blue) connector.
Check for continuity between the Yellow/black
wire terminal of the connector and ground, and
between the Green/orange #3 wire terminal of
the connector and ground.
TOOL:
Test probe
CONNECTION: Y ellow/black - Ground
Is there continuity?
YES
NO
4. Speed Sensor Line Short Circuit Inspection (at
sensor side)
Check for continuity between each terminal
(Black and White) of the sensor side 2P connec­
tor and ground in the same manner as the previ­
ous step.
CONNECTION: Black
Is there continuity?
YES
NO
5. Speed Sensor Line Open Circuit Inspection
Short the Yellow/black and Green/orange #3
wire terminals of the 25P connector with a
jumper wire.
Check for continuity between the terminals of
the wire harness side sensor 2P (Blue) connec•
tor.
CONNECTION: Black
Is there continuity?
YES
NO
16-12
07ZAJ-ROJA 110
Green/orange #3 -
- Short circuit in wire between the ABS
modulator and speed sensor.
- GO TO STEP 4.
- Ground
White - Ground
- Faulty front wheel speed sensor.
- GO TO STEP 5.
- White
- GO TO STEP 6.
- Open circuit in wire between the ABS
modulator and speed sensor.
MODULATOR 25P CONNECTOR
(Wire side/female terminals)
Ground
Yellow/black
2P (Blue) CONNECTOR
(Sensor side/male terminals)
2P (Blue) CONNECTOR
(Wire side/female terminals)
Bl ac k W hit e
/
�
MODULATOR 25P CONNECTOR
(Wire side/female terminals)
Gr ee n /or an ge # 3
...-----
EB