Honda CB 600F Hornet 2007 Shop Manual page 331

CRANKCASE/TRANSMISSION
Install the shift drum and shift drum bearing into the
crankcase.
The shift forks have the following identification
marks:
- "L" for left
- "R" for right
- "C" for center
Install the shift forks into the shift drum guide
grooves with the identification marks facing toward
the right side of the engine and insert the fork shaft.
Apply a locking agent to the shift drum bearing set
bolt threads.
Tighten the bolts/washers to the specified torque.
TORQUE: 12 N•m (1.2 kgf•m, 9 lbf•ft)
11-14