Honda CB 600F Hornet 2007 Shop Manual page 443

HYDRAULIC BRAKE
Install the snap ring into the groove in the master
Make sure rhe snap
cylinder.
rmg ,s seated
f1tm/y
m the groove.
TOOL:
Snap ring pliers
Apply silicone grease inside the boot.
Install the boot into the master cylinder and the pis­
ton groove.
Apply silicone grease to the brake lever contacting
surface of the master piston.
Install the brake light switch and tighten the screw.
TORQUE: 1.2 N•m (0.1 kgf•m, 0.9 lbf-ft)
15-24
07914-SA50001
SWITCH
BOOT
SCREW