INSPECTION
Check the fuel pump unit and chamber for wear or
damage, replace them as an assembly if necessary.
Clean the fuel strainer screen with non-flammable ���:-:::
or high flash point solvent.
INSTALLATION
Install the fuel pump chamber, hooking its tab to the
hole of fuel pump unit.
Always replace the Place a new packing onto the fuel pump unit.
packing with
new
a
one.
Install the fuel pump unit into the fuel tank.
Be careful not to
damage the pump
wire.
Install the fuel pump mounting nuts with the stay.
Tighten the nuts in the specified sequence as
shown.
TORQUE: 12 N-m (1.2 kgf-m, 9 lbf·ft)
Install the fuel tank (page 5-59).
FUEL SYSTEM (PGM-FI)
FUEL STRAINER SCREEN
5-57