Honda CB 600F Hornet 2007 Shop Manual page 247

I
ENGINE REMOVAL/INSTALLATION
Secure the alternator wire with the clamps.
Connect the alternator 3P (Black) connector.
Install the regulator/rectifier and tighten the stay
bolts securely.
Connect the PAIR air suction hoses to the cylinder
head cover.
Connect the spark plug caps securely.
Install the drive sprocket with its "15T" mark facing
out.
Install the washer and drive sprocket bolt.
Tighten the drive sprocket bolt to the specified
torque.
TORQUE: 54 N-m (5.5 kgf·m, 40 lbf·ft)
Install the following:
-
- air cleaner housing (page 5-75)
-
7-14
crankcase rear cover (page 7-15)
exhaust pipe (page 2-15)