Tighten the vacuum chamber screw securely.
Install the IDC solenoid valve and tighten the screw
securely.
Connect the vacuum hoses to the one-way valve.
Refer to 'CABLE
& Route the vacuum hoses and connect them to the
HARNESS
IDC solenoid valve and vacuum chamber.
ROlfrlNG'
1·
(page
23 )
Install the injector sub-harness on the air cleaner
housing.
Connect the IACV 4P (Black) connector.
Refe, to "CABLE &
Route the injector sub-harness through the guides
HARNESS
of the air cleaner housing.
ROUTING'
(page 1 •
Attach the CKP sensor 2P (Red) connector to the
23)
stay.
Connect the injector 2P {Gray) connectors.
FUEL SYSTEM (PGM-FI)
-�•-=::::;--;'1\li
2P {Gray) CONNECTORS
5-73