Camshaft Installation - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
CYLINDER HEAD/VALVES
Apply molybdenum disulfide oil solution to the
threads and seating surface of the 9 mm bolts/wash-
ers and install them.
Install the two 6 mm flange bolts.
Tighten the 9 mm bolts in a crisscross pattern in two
or three steps to the specified torque.
TORQUE: 47 N·m (4.8 kgf·m, 35 lbf·ft)
Tighten the 6 mm flange bolts securely.
Install the cam chain tensioner lifter onto the cylin-
der head with a new gasket.
Install and tighten the bolts securely.
Install the following:
– camshaft (page 8-26)
– thermostat housing (page 6-10)
– air cleaner housing (page 5-75)
– exhaust system (page 2-12)

CAMSHAFT INSTALLATION

Apply molybdenum oil solution to the outer surface
of the each valve lifter.
Install the shims on the retainers and valve lifters
Install the shims
into the valve lifter bores.
and valve lifters in
their original
locations.
The each camshaft has identification mark.
• "FG": Intake camshaft
• "EX/ER": Exhaust camshaft
8-26
email: info@motomatrix.co.uk
6 mm BOLTS
TENSIONER LIFTER
GASKET
SHIM
"FG" MARK
"EX/ER" MARK
9 mm BOLTS/
WASHERS
VALVE LIFTER