Coat a new O-ring with brake fluid and install it onto
the reservoir hose joint. Install the hose joint into
the master cylinder.
Apply a locking agent to the hose joint screw
threads.
Install the screw and tighten it to the specified
torque.
TORQUE: 1.5 N-m (0.2 kgf•m, 1.1 lbf·ft)
INSTALLATION
Apply grease to the groove in the pedal pivot.
Install the brake pedal and secure it with the washer
and snap ring.
Install the master cylinder onto the pedal with the
joint pin.
HYDRAULIC BRAKE
'um
-� SCREW
MASTER CYLINDER
I�
SNAP RING
/
JOINT PIN
15-31