Connect the ECM 33P (Black and Light gray) connec
tors to the ECM.
Install the ECM on the air cleaner housing.
Install the ECM stay with the screws, then tighten
the screws securely.
Connect the injector sub-harness 1 OP (Black) and
Route the wires
1-
10P (White) connectors, and 02 sensor 4P (Black)
properly (page
23/.
connector.
Attach the connectors to the ECM stay securely.
Route the IDC solenoid valve vacuum hose onto the
ECM.
Install the right air cleaner duct to the air cleaner
housing.
Tighten the screws securely.
FUEL SYSTEM (PGM-FI)
5-79