Honda CB 600F Hornet 2007 Shop Manual page 288

Remove the clutch spring bolts, springs in a criss­
cross pattern in two to three steps, then remove the
pressure plate.
Remove the clutch lifter piece from the lifter bear­
ing.
Remove the following:
- clutch disc A
- six clutch discs
- seven clutch plates
- clutch disc B
- judder spring
- spring seat
Unstake the clutch center lock nut.
Hold the clutch center with the special tool and
remove the clutch center lock nut.
TOOL:
Clutch center holder
Discard the lock nut.
CLUTCH/ST ARTER CLUTCH/GEARSHIFT LINKAGE
07724-0050002 or
equivalent commer­
cially available
9-7