Honda CB 600F Hornet 2007 Shop Manual page 274

Apply a locking a gent to the cam chain tensioner
pivot bolt threads.
Install the collar, cam chain tensioner A and bolt
Tighten the cam chain guide A bolt to the specified
torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 !bf . ft)
Tighten the cam chain tensioner A pivot bolt to the
specified torque .
TORQUE: 12 N·m (1.2 kgf•m, 9 lbf•ft)
Install the following:
- starter clutch (page 9-21)
right crankcase cover (page 9-25)
Install the dowel pins and a new cylinder head gas­
ket as shown.
Install the cylinder head onto the cylinder block
while aligning the cam chain tensioner A and B as
shown.
CYLINDER HEAD/\l
DOWEL PINS
CYLINDER HEAD
8-25