Honda CB 600F Hornet 2007 Shop Manual page 209

Disconnect the PAIR control solenoid valve 2P
(Black) connector.
Pull the PAIR control solenoid valve out the stay.
Installation is in the reverse order of removal.
Inspection
Remove the PAIR control solenoid valve.
Check that air flows (A) to (BJ when the 12 v battery
is connected to the PAIR control solenoid valve ter­
minals. Air should not flow (Al to (B) when the bat­
tery is disconnected.
Check the resistance between the terminals of the
PAIR control solenoid valve.
n
STANDARD: 23 - 21 (20 °C/68 °F1
If the resistance is out of specification, replace the
PAIR control solenoid valve.
FUEL SYSTEM (PGM-FI)
(Bl
PAIR SOLENOID VALVE
( Bl
( A l
5-99