Honda CB 600F Hornet 2007 Shop Manual page 286

RIGHT CRANKCASE COVER REMOVAL
Drain the engine oil (page 3-15).
Remove the bolt and clutch cable guide plate, then
disconnect the clutch cable end from the clutch lifter
lever.
Release the EOP switch wire from the clamp.
Remove the right crankcase cover bolts and clamp.
The Hfter lever Remove the right crankcase cover while turning the
spindle is en�ged clutch lifter lever counterclockwise to disengage the
with the clutch lifrer
lifter lever spindle from the lifter piece.
piece ,nside of the
NOTE:
right crankcase
Be careful not to drop the thrust/wave washers into
cover.
the crankcase when removing the right crankcase
cover.
Remove the thrust washer and wave washer from
the starter idle gear.
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
9-5