Honda CB 600F Hornet 2007 Shop Manual page 86

Remove the crankcase rear cover (page 7-4).
Check the attaching bolt and nuts on the drive and
driven sprockets.
Tighten the bolt or nut to the specified torque if nec­
essary.
TORQUE:
Drive sprocket bolt: 54 N,m (5.5 kg•m, 40 lbf-ft)
Driven sprocket nut: 108 N•m (11.0 kgf•m. 80 lbf•ft)
REPLACEMENT
This motorcycle uses a drive chain with a staked
master link.
Loosen the drive chain (page 3-19).
Assemble the special tool as shown.
When using the
spec,al tool, follow
TOOL:
the manufacturer's
Dr iv e ch ain too l s e t
ins r,u ct, o n.
07HMH-MR10103
DRIVE CHAIN TOOL SET:
\..'..:2
(j) �
MAINTENANCE
0
3-21