Honda CB 600F Hornet 2007 Shop Manual page 459

HYDRAULIC BRAKE
Coat new piston seals with clean brake fluid and
install them into the seal grooves in the caliper.
Coat new dust seals with silicone grease and Install
them into the seal grooves in the caliper.
Coat the caliper pistons with clean brake fluid and
install them into the caliper cylinders with the open­
ing toward the pads.
N o te the installation
Install the pad spring in the caliper body.
h
d,rec t ion o f t e p ad
Install the bracket pin boot into the caliper body.
s p ring.
Check that the pad retainer is in place on the caliper
bracket.
Install the caliper pin boot Into the caliper bracket.
Apply silicone grease to the inside of the boots and
the slide pins.
Install the caliper bracket over the caliper body.
15-40
BOOT
PAD SPRING
PAD REATAINER CALIPER BRACKET
BOOT
CALIPER BRACKET
CALIPER BODY
CALIPER BODY