MAINTENANCE
CLEANING AND LUBRICATION
Clean the chain with non-flammable or high flash
point solvent and wipe it dry.
Be sure the chain has dried completely before lubri
cating.
Inspect the drive chain for possible damage or wear.
Replace any chain that has damaged rollers, loose
fitting links, or otherwise appears unserviceable.
Installing a new chain on badly worn sprockets will
cause the new chain to wear quickly.
Inspect and replace sprocket as necessary.
Lubricate the drive chain with #80
drive chain lubricant designed specifically for use
with O-ring chains. Wipe off the excess oil or chain
lubricant.
SPROCKETS INSPECTION
Inspect the drive and driven sprocket teeth for wear
or damage, replace if necessary.
Never use a new drive chain on worn sprockets.
Both chain and sprockets must be in good condi
tion, or the new replacement chain will wear rap
idly.
3 -2 0
NON-FLAMMABLE OR HIGH
FLASH POINT SOLVENT
WIPE AND DRY
-
90 gear oil or
LUBRICATE
#80
-
90 GEAR OIL OR DRIVE
CHAIN LUBRICANT
SOFT BRASH