Honda CB 600F Hornet 2007 Shop Manual page 419

Install the brake hose clamps and tighten the screws
to the special torque.
TORQUE: 4.2 N•m (0.4 kgf•m, 3.1 lbf·ft)
Install the drive chain case aligning its slit with the
boss on the swingarm.
Tighten the drive chain case bolts to the specified
torque.
TORQUE: 12 N·m (1.2 kgf•m, 9 lbf·ft)
Install the left footpeg holder and tighten the bolts ---•
to the specified torque.
TORQUE: 37 N·m (3.8 kgf•m, 27 lbf•ft)
Install the rear wheel (page 14-13).
REAR WHEEL/SUSPENSION
DRIVE CH
14-25