Honda CB 600F Hornet 2007 Shop Manual page 294

INSTALLATION
� DRIVE SPROCKET GUIDE
:2''/.r-�,__ ,
CLUTCH D
CLUTCH PLATES
THRUST WASHER
¢!� ----:7J!
•
..._.
Apply molybdenum oil
drive sprocket guide sliding surface and install it to
the mainshaft.
Apply oil to the oil pump drive/driven sprocket teeth
and drive chain.
Install the oil pump drive/driven sprocket and drive
Install the oil pump
chain as an assembly.
driven sprocket
•our
irs
with mark
Apply a locking agent to the oil pump driven
facing our.
sprocket bolt threads.
ro Install the oil pump driven sprocket bolt, washer
Be careful nor
and tighten the bolt to the specified torque.
drop the parts ,nro
the oil pan
TORQUE: 15 N•m (1.5 kgf-m, 11 lbf•ft)
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
CHAIN GUIDE B
..,,,,,
LOCK WASHER
O �
@@�
/
IFTER PIECE
t.l LOCK NUT
128 N-m (13.1 kgf•m,
94 lbf-ft)
solution to the oil pump
NEEDLE BEARING
CLUTCH OUTER GUIDE
LIFTER BEARING
SPRING
LIFTER PLATE
-,
JUDDER SPRING
- --
9-13