Remove the washer, insulator, terminal stopper and
0-ring from the rear cover.
Remove the brush holder assembly from the rear
cover.
Release the brush plate from the brush holder by
turning the terminal bolt.
Disassemble the terminal bolt, positive brushes and
brush holder.
INSPECTION
Measure each brush length.
SERVICE LIMIT: 6.5 mm (0.26 in)
ELECTRIC ST ARTER
TERMINAL STOPPER
INSULATOR
0-RING
TERMINAL BOLT
BRUSH HOLDER
POSITIVE BRUSHES
WASHER
BRUSH HOLDER
TERMINAL BOLT
19-9